Specifications and suppliers are subject to change without notice. Site work specifications may vary by builder, code requirements and location.

Exterior Finishes

• Class “A” fiberglass / asphalt self-sealing architectural grade shingles with 30 year warranty and aluminum drip edge
• 10” Gable Overhangs
• 12” - 16” Front and Rear Overhangs with low maintenance ventilated vinyl soffit and aluminum facia system
• Andersen® 400 Series vinyl clad wood tilt sash windows with removable grills and full screens
• Fiberglass Insulated Exterior Door with wood frame and adjustable oak threshold
• Low Maintenance Solid Vinyl Siding with lifetime non-prorated transferable warranty
• Exterior G.F.I. Outlet at front and rear doors
• Door Chime at front door

Interior Finishes

• 38 oz Carpet with 1/2” foam pad
• Oak Stair Railing
• 1/2” Gypsum Drywall on Walls, 5/8” on Ceilings Prime coat painted
• Pine Interior Trim with prime painted with extended window jamb and sills
• Six Panel masonite hollow core interior doors painted white with triple hinges

Kitchen Features

• Raised panel oak framed cabinets with lazy susan and angle wall cabinet in all corners
• Self edged high pressure laminate countertop by Wilsonart® with 4” backsplash. (Optional diamond edge molding)
• 8” deep double bowl stainless steel sink with single lever Delta® faucet and spray

Bath Features

• Raised panel Oak Vanities with Wilsonart® laminate countertop and china basin, mirror, beauty bar light and recessed medicine cabinet
• One Piece Fiberglas Tub / Shower Unit with Delta® temperature balancing valve to prevent “shower shock”
• Single lever Delta® Vanity Faucet
• Elongated Vitreous China Water Closet
• Copper water supply lines; PVC drain, waste and vent lines
• Bath Fan/Light Combination

Exterior Structure

• 5/8” Plywood Roof Sheathing
• #15 Felt Paper under roof shingles
• Ice & Water Sheild
• Full Length Attic Ridge-Ventilating System
• 2x10 Double Rim Joists with 1/2” plywood between joists front & rear
• 2x6 (on the flat) between ceiling and 2nd floor
• 2x6 Exterior Studding 16” On Center
• 1/2” Plywood Exterior Sheathing Glued & Fastened including mating wall
• Air Infiltration Moisture Wrap
• R-19 Batt Type Wall Insulation
• R-38 Batt Type Ceiling Insulation

Interior Structure

• 2x10 Floor Joists 16” on center
• Solid Wood bridging at center spans
• Steel Joist hangers on mating walls
• 3/4” Tongue & Groove Fir Plywood Floor, glued & fastened
• 2x4 Interior Studding 16” on center with full 8’ ceiling height
• Sheetrock “Foam-Sealed” in place

Mechanical/Electrical

• SLANT-FIN® hot water baseboards factory installed; furnace supplied & installed on-site by builder
• 200 Amp Service 40 circuit service panel with circuit breakers (shipped loose)